Feature Group in NX7.5

[funny123]

Hello,

I have a UG startup file in which there are some feature Groups. In that start up file i have created a new "Feature Group". But the Feature Group created by me having different icon as shown in the attached image.What could be the possible reason for this difference.

Please help me

Thanks in advance

 

[cowski]

It appears that the last feature group does not yet contain any features. Try adding a feature or 2 and collapsing the group (hiding the members) to see if the icon changes.

 

[funny123]

Hello

Even if i add some features to it and do some operations, there is no change in the icon.

if i right click on the old feature group i am getting the command named "Make this group active" along with some general commands. I am not getting this with the New feature group created by me.

should i need to change any customer default setting. Please help me in this regard.

Thanks in advance

 

[JohnRBaker]

EXACTLY which version of NX are you running?

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[funny123]

Hello,

I am using NX 7.5.1.5.

I could activate or deactivate the Feature groups that are provided in Start up file. But this is not possible for the feature groups created by me.

Please help me John

have a nice day

Thanks in Advance

 

[funny123]

Hello everybody,

I am looking forward for your kind help

Thanks in advance

 

[JohnRBaker]

I have nothing at the moment. Perhaps tomorrow.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[funny123]

Hello John,

Still i am struggling to get the difference between the Feature groups.Could you please help me.

is it due to difference in settings?

Thanks in advance

have a nice day

 

[JohnRBaker]

I haven't found anything on this myself. But I've got a couple more people to talk about this to.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.