Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Forming of aluminum alloys 1

Status
Not open for further replies.
Replies continue below

Recommended for you

Sort by date Sort by votes
It is defined as "Inelastic deformation". If you have a copy of Tool and Manufacturing Engineers handbook, there is a section on metal forming that covers this topic.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Esam Mahmoud
  • Locked
  • Question
Pipe end forming
Replies
3
Views
26
Esam Mahmoud
Esam Mahmoud
Ramadan Ahmed
  • Locked
  • Question
Width of an O-Ring Groove to an Edge 7
Replies
13
Views
26
mfgenggear
mfgenggear
RnD bird
  • Locked
  • Question
Stripping of housing ports solution
Replies
1
Views
18
desertfox
desertfox
RanaAq
  • Locked
  • Question
Centreless grinding of end flat shaft
Replies
0
Views
14
RanaAq
RanaAq
tarekzad
  • Locked
  • Question
Belt Conveyor Rule of Thumb Specific energy (kWh/t.km) 2
Replies
13
Views
63
LittleInch
LittleInch
Back
Top