Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Grey Dimensions of threads
- Thread starter wolfgrrl
- Start date
Hi Wolfgrrl (is that a typo?)
Are you using the Thread dimension function? If so, have you checked Tools-Options-Drafting-Dimension tab page?
On this location there is a facility to define colours for dimensions e.g. Fake; Not up to date; etc.
The default colour for dimensions created using this function is light green (dimensions from 3D), perhaps the colour has been changed to grey?
Along the bottom of the screen in Drafting is a Thread Analysis function, if deselected your dimension will turn black. This will also determine if the Tools-Options setting is the reason.
Failing that could you post a picture?
Are you using the Thread dimension function? If so, have you checked Tools-Options-Drafting-Dimension tab page?
On this location there is a facility to define colours for dimensions e.g. Fake; Not up to date; etc.
The default colour for dimensions created using this function is light green (dimensions from 3D), perhaps the colour has been changed to grey?
Along the bottom of the screen in Drafting is a Thread Analysis function, if deselected your dimension will turn black. This will also determine if the Tools-Options setting is the reason.
Failing that could you post a picture?
- Status
