Thanh Tran
Industrial
Hi,
Is there anyone running the Gweike LF3015GA fiber laser? If so, is it good laser and operate easily?
Is there anyone running the Gweike LF3015GA fiber laser? If so, is it good laser and operate easily?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
GWeike fiber laser
- Thread starter Thanh Tran
- Start date
- Status
Hi,
yes, we have this laser machine from Czech dealer and it is just fine. Fiber laser with easy oparations. I can recommend this cutting CNC laser.
Have a nice day.
Greetings from Czech Republic.
yes, we have this laser machine from Czech dealer and it is just fine. Fiber laser with easy oparations. I can recommend this cutting CNC laser.
Have a nice day.
Greetings from Czech Republic.
- Thread starter
- #3
Thanh Tran
Industrial
@Kovo drs
Do you know how to cut with fixed height hold (the laser won’t move up and down)? We want to cut something not flat so we want to keep the head not move up down to avoid crashing the head.
Do you know how to cut with fixed height hold (the laser won’t move up and down)? We want to cut something not flat so we want to keep the head not move up down to avoid crashing the head.
- Status
Similar threads
- Locked
- Question
- Locked
- Question