Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hand-like robot

Status
Not open for further replies.

xelon

Computer
Jul 30, 2003
3
TR
For designing hand or leg part of the robot,How you doing turning part of
it?The only way is to use a DC Motor.Or is there any other way???

 
Replies continue below

Recommended for you

Stepper motors or servo motors are fequently used in robotic applications.

xnuke

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
thanks,
but there are some problems.How can I give motion to the robot.I mean Do i have to connect the DC motor and other part with a wire , string or
something?
Or directly I put it near wheel and DC Motor turns the wheel without any
other stuff?
 
You can make the mechanical connections between motors and actuators/manipulators a variety of ways. You should consider doing an Internet search to learn more about the basics of robotics and machine control. It sounds like you're in way over your head.

xnuke

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top