hello I want to convert gcode data 1

[SHRINIL RANA]

hello
I want to convert gcode data file into event series data for Abaqus AM modeler?

 

[FEA way]

There is a Python script for that (named generateEventSeries.py). It can be found in Dassault Systemes Knowledge Base.

Check this thread for more details:

https://www.eng-tips.com/viewthread.cfm?qid=473915

 

[SHRINIL RANA]

is there any tutorial available for AM modeler?

 

[FEA way]

Several tutorial files are available in the Knowledge Base article "Abaqus/CAE Plug-in Utility for Additive Manufacturing Process Simulation". The same one that provides the generateEventSeries.py script.

 

[SHRINIL RANA]

thank you!!
I want to do a tensile test on 3D printed part. so for finite element analysis abaqus is suitable?

 

[FEA way]

Sure, Abaqus has advanced built-in features for additive manufacturing process simulations. When the analysis of the process is done, you can use the model for further static strength assesment. Thanks to the previous thermo-mechanical simulation you will be able to account for residual stresses caused by manufacturing.

 

[SHRINIL RANA]

Thank you.
Actually I am using ultimaker cura for slicing.
so I generate g code file from that software so that can I convert into event series data?

 

[FEA way]

The script is designed for use with gCode generated in ReplicatorG software. You may have to edit some parts of the code to make it work with paths from other programs.

 

[SHRINIL RANA]

Thank you.
ReplicatorG software link is available?

 

[FEA way]

ReplicatorG is open-source software so you can download it for free from its website or from GitHub. It's not very user-friendly, hasn't been updated for several years and has outdated GUI but should be sufficient in many cases.

 

[SHRINIL RANA]

Thank you FEA way.

 

[SHRINIL RANA]

Hello
I want to find the density of my part from slicing software (ultimaker cura)?

 

[FEA way]

In Abaqus you can use Query --> Mass properties on imported part for this purpose.