Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello, When I want to calculat 4

Status
Not open for further replies.

MBCatia

Industrial
Aug 30, 2019
62
Hello,


When I want to calculate Weight with Measure Inertia for a product (Catia R24)
eng_tips_esox9b.png


There is a problem just below "Not Uniform"
eng_tips_soru_auytzq.png


But if you use Catia R19 same it is possible to write value.

Anybody have any solution for this?
I can weight one part one and calculate total but time is running. Macro etc. maybe?

But maybe there is solution on tools->options

Thank you
Best regards
 
Replies continue below

Recommended for you

To get accurate weight for an assembly, you must add materials to all the solids.
Also make sure material has Density entered.
 
When you measure the assembly you will get not uniform if you have components with different densities.
 
Hello, when I want to do it, I make fist cgr from the assy and then I measure it. But as others mentioned, it must be same density for all parts. If I have big cast for example with density 7300 and a lot of small parts with density 7850 I use 7400 or 7500.

[link catiavbmacro.com ]catiavbmacro.com[/url]
 
Thank you everyone,

As far as I see, If there is a part it has no solid body it is making problem for calculate weight for a product.

All parts must be solid volume then it is working.

Thank you again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor