Feb 4, 2003 #1 jag27 Mechanical Feb 4, 2003 49 i have a stator for a brushless dc motor with about 60% slot fill need help winding it single tooth
Feb 4, 2003 #2 nbucska Electrical Jun 1, 2000 2,191 Do you want to rewind it for the same VTG or different ? <nbucska@pcperipherals.com> Upvote 0 Downvote
Feb 4, 2003 Thread starter #3 jag27 Mechanical Feb 4, 2003 49 new winding 15-18 guage wire Upvote 0 Downvote
Feb 4, 2003 #4 nbucska Electrical Jun 1, 2000 2,191 Do you want to rewind it for the same voltage or different? ( if later, give both ) <nbucska@pcperipherals.com> Upvote 0 Downvote
Do you want to rewind it for the same voltage or different? ( if later, give both ) <nbucska@pcperipherals.com>
Feb 7, 2003 #6 nbucska Electrical Jun 1, 2000 2,191 What is the problem? cut out a section of a coil, count the turns, etc. <nbucska@pcperipherals.com> Upvote 0 Downvote
Feb 7, 2003 Thread starter #7 jag27 Mechanical Feb 4, 2003 49 no i need to find a company that does in slot windings on a mass production basis Upvote 0 Downvote
Feb 8, 2003 #8 jbartos Electrical Jan 15, 2000 6,440 Suggestion: It may be a good idea to start with windings. Visit http://www.thomasregister.comand type Coils: Copper (Electrical, Motor, Wire Winding Types) under Product or Service which will return 22 companies to contact for windings and a mass production. Upvote 0 Downvote
Suggestion: It may be a good idea to start with windings. Visit http://www.thomasregister.comand type Coils: Copper (Electrical, Motor, Wire Winding Types) under Product or Service which will return 22 companies to contact for windings and a mass production.
Feb 11, 2003 Thread starter #9 jag27 Mechanical Feb 4, 2003 49 anybody did any work with a company called electrowind Upvote 0 Downvote
Feb 22, 2003 #10 ognen Electrical Dec 17, 2002 5 no, but what do you need exactly? I'm working in such industry? contact me at gjovanoska@mt.net.mk Upvote 0 Downvote
Feb 24, 2003 Thread starter #11 jag27 Mechanical Feb 4, 2003 49 about 70% slot fill 16-18 guage wire 3 in hand 9turns skew of 1/2 slot ( 9 slots total) Upvote 0 Downvote
