Hi ,Aero buddies need attention of

[Manu_12]

Hi ,Aero buddies need attention of Aerelasticity guys , I am emcountering this Error in my simulations ,i Wish nany one of u guys can help me out USER FATAL MESSAGE 9099 (SUBDMAP PHASE1A) NO FORCES ARE SPLINED TO THE STRUCTURE. USER INFORMATION: AT LEAST ONE SPLINE MUST BE USAGE=FORCE OR USAGE=BOTH IN MODEL AEROSG2D.

 

[KirbyWan]

Without even knowing what software you are using it would be hard to help. I would suggest going to a forum for that specific piece of software. There are a few here on ENG-TIPS in the engineering computer programs for the most commonly used applications. I suggest more detail about the type of system you are working on.

good luck,

-Kirby

Kirby Wilkerson

Remember, first define the problem, then solve it.

 

[rb1957]

this seems like a very basic error ... have you run through a tutorial problem (or even gone onto YT ) ?

"Hoffen wir mal, dass alles gut geht !"
General Paulus, Nov 1942, outside Stalingrad after the launch of Operation Uranus.

 

[Manu_12]

sorry for providing incomplete information I have defined splines using msc flight loads , (aeroelasticity) window ,and solved using nastran