Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi I am looking for non asbestos g

Status
Not open for further replies.

telme

Mechanical
May 29, 2002
3
0
0
CA
Hi
I am looking for non asbestos gaskets materials for use in Refinery applications to substitute all asbestos materials and also atleast five reputed non asbestos gasket manufacturers and lastly properties of different non asbestos gaskets(at least a few)
 
Replies continue below

Recommended for you

Garlock and several other's have a good selection.
Much will depend on your application. Temperature
will be a big factor so have all your details ready
when you contact your supplier.

Nothing will totally replace Blue Asbestos as it was
the altimate gasket material years ago. However, the A word is no longer acceptable so we all have to get other non-asbestos materials.

Gasket materials can get expensive depending on your application.

Wayne E. Lovison
service-parts@naglepumps.com
 
Status
Not open for further replies.
Back
Top