Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

How to calculate the coordinate angle of two points in the post processor?

Status
Not open for further replies.
Jay Yu

Jay Yu

Industrial
Oct 4, 2022
3
0
0
TW
For example the following example

X2.924 Y-737.155 A0.568236364 <===ATAN(ABS((X5.475-X2.924)/(Y-737.081-Y-737.155))
X5.475 Y-737.081

How to write the formula in the post processor?
 
Status
Not open for further replies.

Similar threads

Jian Wang
  • Locked
  • Question
Export points coordinate from NX to txt
Replies
4
Views
23
Jian Wang
Jian Wang
Jay Yu
  • Locked
  • Question
How to calculate the coordinate angle of two points in the post processor?
Replies
1
Views
10
ewh
ewh
Jay Yu
  • Locked
  • Question
How to calculate the coordinate angle of two points in the post processor?
Replies
0
Views
7
Jay Yu
Jay Yu
nxexplorer
  • Locked
  • Question
NX Post Builder make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573
Replies
0
Views
13
nxexplorer
nxexplorer
DDerek
  • Locked
  • Question
How to make &quot;Balloon&quot; Result in only the number for the callout
Replies
3
Views
14
SDETERS
SDETERS
Back
Top