Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to compile and link a UFunc program 1

Status
Not open for further replies.

karthikj

Mechanical
May 27, 2003
40
Hi all,

how to compile and link a external ufunc program ,
how to compile and link a internal ufunc program.
i am having a program taken from UGOPEN (ext_uf_example.C)
This is a external ufunc prg.
Please explain using this as an example.
I have tried reading the UG tutorial but i could not follow it as it is confusing.
i am working in windows 2000 amd UG 18.

Thanx,
Karthikeyan.J
 
Replies continue below

Recommended for you

There is an article in UGanswer that explains how to set up Visual C 6.0 to work with UG. Article is 002-0002333, titled "How to set up and use Microsoft Visual C++ with UG/Open"



"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
Hi Ben,
Could you please tell me how to compile and link the ufunc on UNIX machine?
What are the changes required in makefile for this?
the commmands required to use to create executable?

Thanks
Nikhil
 
Sorry, I have never tried UG/Open API on any Unix box.

Check the UGanswer database.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
Hi Ben,
where can I get the UGanswer database?

Nikhil
 
Go to this page:

You have to have a UG Webkey account.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor