how to compile and link a UFunc program 1

[karthikj]

Hi all,

how to compile and link a external ufunc program ,
how to compile and link a internal ufunc program.
i am having a program taken from UGOPEN (ext_uf_example.C)
This is a external ufunc prg.
Please explain using this as an example.
I have tried reading the UG tutorial but i could not follow it as it is confusing.
i am working in windows 2000 amd UG 18.

Thanx,
Karthikeyan.J

 

[looslib]

There is an article in UGanswer that explains how to set up Visual C 6.0 to work with UG. Article is 002-0002333, titled "How to set up and use Microsoft Visual C++ with UG/Open"



"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[karthikj]

Hi Ben,

Thanks

Karthikeyan.J

 

[deoria]

Hi Ben,
Could you please tell me how to compile and link the ufunc on UNIX machine?
What are the changes required in makefile for this?
the commmands required to use to create executable?

Thanks
Nikhil

 

[looslib]

Sorry, I have never tried UG/Open API on any Unix box.

Check the UGanswer database.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[deoria]

Hi Ben,
where can I get the UGanswer database?

Nikhil

 

[looslib]

Go to this page:

http://support.plms-eds.com/

You have to have a UG Webkey account.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand