HTD 14M tooth profile standards

[dtwo]

I am looking for standard dimensions for HTD 14M tooth profile. I got the overall dimensions from a power transmission catalog however I am looking for more specific tooth geometry dimensions.

 

[Barry1961]

You might be able to get the info from a gear shop or send then a sprocket and have them plot it. I think the machine they do this with is a Klinge... There is a company called IDC that has one somewhere around Detriot.

Barry1961

 

[diamondjim]

The teeth can either be hobbed or
shaped so the profiles can be different.
Power Transmission Catalogue is an
ok reference from what I have seen.
The information is also in the machineries
handbook at least the later editions.

 

[3020]

You may try the Uniroyal patent fot HTD. I believe it was in the early 70's.

 

[patdaly]

In many cases you need to know the specific belt manufacturer, as HTD is becoming increasingly used as a generic term while many manufacturers are changing the form just enough to mess you up.