Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HydroCAD - Weir Model

Status
Not open for further replies.

SimonLuc

Civil/Environmental
Jul 1, 2024
3
Hello,
I’m reaching out to see if you can help me with modelling an outlet device based on the information provided in the attached PDF. I can’t figure out how to create the weirs (boxed in red), but I managed to model everything else. Unfortunately, I do not have additional information for the weir and do not know the type (sharp-crested, broad-crested, etc.). Is it possible to model this based on what I have?
 
 https://files.engineering.com/getfile.aspx?folder=2f2262a5-2be5-47ad-80fb-c4bdedfd06e0&file=HydroCAD_Weir_Model.pdf
Replies continue below

Recommended for you

Your PDF shows how you have modeled the weirs in HydroCAD, but it doesn't give me any idea of what you're actually trying to model. Do you have a sketch of the weir?



Peter Smart
HydroCAD Software
 
Hi Peter,
Sorry, I should've clarified this. I'm trying to recreate the HydroCAD model based on the attached PDF. I don't have other information to work with besides the HydroCAD reports and I don't have a sketch of the weir. Also, I was not provided a contact to the original person that created the PDF which is why I'm struggling to piece this model together.
 
Since you have the HydroCAD report, you can create the outlet devices exactly as shown. Devices 3 and 4 appear to have been created with the Orifice/Grate outlet device.

Peter Smart
HydroCAD Software
 
Hi Peter,
I've got it all modelled now. Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor