Identify a Drawing Symbol 1

[R.Billings]

Hello
Could anyone tell me what this symbol means?
It is on a drawing of a stamped metal part. Not pointed at any specific area, just in the general notes section.
Much appreciated.

 

[R.Billings]

Found it. It is a Burr and break symbol and tolerance.

 

[Ryan6338]

The symbol is defined in ISO 13715. Technically the drawing should call out the standard explicitly.



Ryan.

 

[fcsuper]

R.Billings, Did you just run across this on a drawing, or do you need to make it for drawings that you wish to create?

Matt Lorono, CSWP
Product Definition Manager, DS SolidWorks Corp
Personal sites:
SolidWorks Legion

 

[R.Billings]

Hello Matt
One of the designers found it on an older drawing that is being updated.
I've passed on the information about specifying the standard, since the drawing shows a different ISO standard, and it appears that the change is being processed.
Thanks to all that have helped.