Does anyone have any experience using an inflatable seal (i.e., a Pawling or similar inflatable gasket) as a pressure vessel closure? This would be the only component sealing the main vessel closure/cover and I'm concerned that it will not meet ASME B&PV UG-35.2 criteria. The vessel is designed for 30 psig/FV and 275F.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Inflatable Seal
- Thread starter sheuer
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question