obsy
Mechanical
- Dec 6, 2004
- 5
Hi all,
I'm designing and constructing a remotely operated infrared switch with a 1.4Volt power supply for the reciever.
I want to be able to remotely switch on and off another circuit. The system will comprise of two parts the transmitter and the reciever.
The reciever will be between the power source and the circuit I wish to switch on and off.
The transmitter will use a power pack ( say 12volts or less) and house a switch (push on - push off is prefered operation) and an infrared LED.
The reciever must be as compact as possible (use mimimal components) while also being able to run off 1.4 Volts.
I know there are kits and circuits already designed for recievers powered off 9 volts and 12 volts but I need the reciever to work with 1.4 volts.
I can get away with adding some more batteries to get 2.4 or 3.6 volts power source to the reciever if neccessary.
Any help at all with this would be greatly appreciated.
Thanks,
Obsy
I'm designing and constructing a remotely operated infrared switch with a 1.4Volt power supply for the reciever.
I want to be able to remotely switch on and off another circuit. The system will comprise of two parts the transmitter and the reciever.
The reciever will be between the power source and the circuit I wish to switch on and off.
The transmitter will use a power pack ( say 12volts or less) and house a switch (push on - push off is prefered operation) and an infrared LED.
The reciever must be as compact as possible (use mimimal components) while also being able to run off 1.4 Volts.
I know there are kits and circuits already designed for recievers powered off 9 volts and 12 volts but I need the reciever to work with 1.4 volts.
I can get away with adding some more batteries to get 2.4 or 3.6 volts power source to the reciever if neccessary.
Any help at all with this would be greatly appreciated.
Thanks,
Obsy