Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Input .inp file in Abaqus

Thread starter Turbonorman
Start date Dec 13, 2013

Status: Not open for further replies.

Dec 13, 2013

Turbonorman

Mechanical

So I have a .inp file from a CFD program (given to me). I also have a pipeline model I have created in Abaqus. Basically I created the pipework model first in abaqus, handed the model to a CFD consultant who modeled the pressures from fluid moving through the pipeline and has now handed me the .imp file containing the pressures to be input into my Abaqus CAE model.
My question is how do I apply the pressures from the .inp file to my model?

Thanks