Internet traffic analysis

[BOB123]

Hi folks!

I'm looking for a rule of thumb to follow regarding sizing of network capacity. What I need to determine is how large of a pipe to provision for an as-yet unbuilt network given a known number of subscribers?

I'd like to know approximately how many simultaneous subscribers can fit on N kbps of pipe. Also, how many potential users can have access to the network?

Any advice would be appreciated!

Bob

 

[gabbyrl]

Well, based on my experienced, we consider first on the no of clients. Then, initially, we will have a ratio of 1:10 per client access, w/c means one line for every 10 clients. And per line, we assume a 4Kbits per line. Then observed the taffic data. And if 1:10 is not enough, we go 1:8 and so forth. Hope this would give you an idea. Good luck.


gabbyrl

 

[BOB123]

Gabbyrl,

That's what I needed for now, just a rule of thumb to get started. But if you or anyone else comes across any more exact methods or formulas, let me know.

Thanks!

Bob