Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Is It possiable??
- Thread starter neeruk
- Start date
REDesigner09
Aerospace
Hi,
It appears that you need to speak with the programmer or company who developed this application to submit your change requests.
It appears that you need to speak with the programmer or company who developed this application to submit your change requests.
Looks like you're trying out PostBuilder...
Yes, you can change just about anything.
By changing that to Head, you realize it goes from a Head/Table to a Head/Head setup - completely different machine configurations. You have to be aware of the underlying values assigned to that axis such as the pivot offset and rotation limits as the major issues.
--
Bill
Yes, you can change just about anything.
By changing that to Head, you realize it goes from a Head/Table to a Head/Head setup - completely different machine configurations. You have to be aware of the underlying values assigned to that axis such as the pivot offset and rotation limits as the major issues.
--
Bill
Buckshott00
Bioengineer
Yes you can change axis headings. I think the first thing you should do is make sure that your MCS of your model in CAM matches the MCS of your machine.
- Status
Similar threads
