ISO 14692 LOAD CASES COMBINATIONS CAESAR II

[PIPING_DESIGNER]

I have to start a pipline stress analysis using caesar ii software.
[ul]STANDARD: ISO 14692[/ul]
[ul]pipe material: GRP/ FRP FIBERGLASS REINFORCED PLASTIC[/ul]
[ul]FLUID: WATER[/ul]
[ul]WW: WATER FILLED WEIGHT[/ul]
[ul]PRESSURE P1[/ul]
[ul]HYDROTEST PRESSURE HP1[/ul]
[ul]TEMPERATURE T1[/ul]
[ul]WIND: WIND1,WIND2,WIND3,WIND4[/ul]
[ul]EARTHQUAKE UNIFORM LOAD: U1,U2,U3[/ul]
[ul]STRESS TYPE: HYD,SUS,OPE,OCC,....[/ul]
Please help me to define the best load cases combinations for this project according to the standard ISO 14692

 

[Bgregory006]

Start here. Should help give atleast some basis:

I'm reading "stress analysis of gre piping " on Scribd.

Check it out:

https://www.scribd.com/doc/427811217