joining two lofts

[jeffyoung90]

I lofted two cones using the same circle at one end and two different points at the other. I need to merge the bottom portion and remove the overlapping faces, is there a way to do this?

 

[CorBlimeyLimey]

If you have created a multi-body part (i.e. the lofts are not merged with anything else) the Combine tool should be suitable.

http://help.solidworks.com/2013/English/solidworks/sldworks/c_combine_bodies.htm

 

[jeffyoung90]

Solidworks doesn't seem to recognize the lofts as bodies, just surfaces. Is there any way to combine surfaces?

 

[CorBlimeyLimey]

<sigh> When describing a problem it is usually helpful to relay ALL the relevant details. Solids & Surfaces use different tools. Try the Trim tool in the Surfaces toolbar.

If that's not what you need, and to prevent this turning into a "20 Questions" game, please upload the file or at least an image showing what you want to do.

 

[jeffyoung90]

Trim did the trick. Thank you and sorry for the confusion/lack of detail.