Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Knowledge Advisor - create Point on line while meeting a criteria

Status
Not open for further replies.

appvid

Automotive
Nov 9, 2012
81
US
Hi all
I need to pick your brain.

I like to create a Point X on line ). But Like to meet a criteria. a+b must be to my input.

I have tried with While statement but did not work. any ideas. appreciate it .

may be not using while statement correct- Catia does not respond and I have to kill catia session ( updated 6/13/22--)

point_X_w1ypx0.jpg
 
Replies continue below

Recommended for you

Hi , I know the Total length of of the curve. user will input that length.
Also I know the curve length -C too

point_X-33_oxrgn2.jpg
 
i solved it with few trails..
used while command..

for i while A+B < something
create point on line X
i = i+1

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top