Could somebody help me please! I have a sketch of a lifting beam and the associated loads for which some calcs are required, I have found the formula that I need to quantify the beam but am struggling to equate the moments and forces to use in the beam design. If I could email the sketch of the beam would somebody be prepared to have a look and point me in the right direction?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Lifting beam design
- Thread starter adiem
- Start date
try this site
everything you need is in there for your calculations
I got smart and outsources our lifter designs
and others will take your sketches and make the parts
Keep the wheels on the ground
Bob
showshine@aol.com
everything you need is in there for your calculations
I got smart and outsources our lifter designs
and others will take your sketches and make the parts
Keep the wheels on the ground
Bob
showshine@aol.com
- Status
Similar threads
- Locked
- Question