Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linear Couplers

Status
Not open for further replies.

apprenticerelaytech

Electrical
Sep 11, 2004
5
I have a question about linear couplers and have not had much luck finding an answer. I have looked through all my protective relaying books, relay literature, and the internet. I also have asked two of my journeyman and a junior relay engineer for help. So far no one has been able to help me. Not to bore you anymore, but I just wanted to show I have tried on my own and now would greatly appreciate some help.

The question seems simple enough:

"When testing a linear coupler with a high current source, what is the relationship between primary and secondary phase angles?"

Any help would be greatly appreciated.
 
Replies continue below

Recommended for you

should ideally be close to zero, in the minutes level.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor