Mar 7, 2008 #1 bgilbert Mechanical Feb 4, 2005 14 Anyone knows where I can find the B-H curve of the SS 416 ? Thanks!
Mar 7, 2008 #2 EdStainless Materials May 20, 2004 16,263 Look for one on 410. It will be important to match your same heat treat condition. (Q&T? what temper temperature?) = = = = = = = = = = = = = = = = = = = = Plymouth Tube Upvote 0 Downvote
Look for one on 410. It will be important to match your same heat treat condition. (Q&T? what temper temperature?) = = = = = = = = = = = = = = = = = = = = Plymouth Tube
Mar 7, 2008 Thread starter #3 bgilbert Mechanical Feb 4, 2005 14 OK, I'll try to find the Q&T, but in the mean time, do you have information about the 410 or 416? Where should I look? Thanks Upvote 0 Downvote
OK, I'll try to find the Q&T, but in the mean time, do you have information about the 410 or 416? Where should I look? Thanks
Mar 7, 2008 #4 dgallup Automotive May 9, 2003 4,715 I have this data that I downloaded when I tried using FEMM. I make no claims to it's accuracy. B (T) H (A/m) 0.000 0.0 0.200 318.3 0.426 477.5 0.761 795.8 1.097 1591.6 1.233 2387.3 1.335 3978.9 1.460 7957.8 1.590 15915.5 1.690 31831.0 1.724 44456.3 1.740 55704.3 Upvote 0 Downvote
I have this data that I downloaded when I tried using FEMM. I make no claims to it's accuracy. B (T) H (A/m) 0.000 0.0 0.200 318.3 0.426 477.5 0.761 795.8 1.097 1591.6 1.233 2387.3 1.335 3978.9 1.460 7957.8 1.590 15915.5 1.690 31831.0 1.724 44456.3 1.740 55704.3
