Making a mold from this 1

[gabi68]

Hi to all,

I need help to make a mold from this design (made it in Rhino). I have access to SW2012. Any advice much appreciated.

Thank you

 

[designer22]

You can open this file directly in SW2012 and use the mold tools to crate the mold for this part.
It's a simple part and easy to create mold core, cavity and slide.

 

[gabi68]

Hi,

If know how to use mold tools is easy. I dont know to use that tools yet hence the advice request. Can you give some tips?

Thank you

 

[designer22]

If you look at the tutorials within SW, there is a very nice tutorial explaining the step by step use of mold tools
There are videos on the internet showing the mold design in SW
Please see this one
Once you get a basic idea of mold tools, you try on your part and if you still have problems, then someone can help you to identify the problem

 

[gabi68]

Hi,

I see quite a number of tutorials on YT. My problem is the parting line on that design. Can you help me with that?

Thank you for your time
Gabi

 

[gabi68]

Hi,

Anyone can help me with that parting line, please?

Thank you
Gabi

 

[laik]

Hi,
the basic

 

[gabi68]

Hi laik,

Thank you very much for taking tme and post that file. I was close to make it myself after a night of frustration. Seeing that file help me alot. Many thanks again.

Gabi