Ygnis
Bioengineer
- Jan 6, 2013
- 4
Hello 
I've been assigned to recommend materials to be used for different parts of a submersible centrifugal seawater pump. I need to select commercially available materials for construction of the following parts of the pump:
1.) Pump Casing
2.) Impeller
3.) Shaft
The seawater pump will be used in the environment with the following conditions:
Total Dissolved Solids: 25,000 ppm
Operating Pressure: 10 bar gauge coastal seawater
Operating Temperature: 30 degrees Celsius
Location of Pump: 10 meters from coastline into the sea
Any reference to a website or pdf file will also be useful.
Regards,
I've been assigned to recommend materials to be used for different parts of a submersible centrifugal seawater pump. I need to select commercially available materials for construction of the following parts of the pump:
1.) Pump Casing
2.) Impeller
3.) Shaft
The seawater pump will be used in the environment with the following conditions:
Total Dissolved Solids: 25,000 ppm
Operating Pressure: 10 bar gauge coastal seawater
Operating Temperature: 30 degrees Celsius
Location of Pump: 10 meters from coastline into the sea
Any reference to a website or pdf file will also be useful.
Regards,