Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mathcad Prime - subscript . and unit font 1

Status
Not open for further replies.
271828

271828

Structural
Mar 7, 2007
2,248
I was a big Mathcad user for years, but went another direction in about 2016. I'm revisiting the possibility of using it again and have been playing with a Prime 6.0.0.0 version.

I've run into two irritants right off the bat. I've spent about 20 minutes trying to figure these out, so it seems like time to ask...

Did they eliminate the ability to use a . to define a subscript? Not an array index, but a regular dead subscript.

Is there a way to change the units font? I've never seen bold, blue, italic used in technical writing, so it looks terrible to me.

Thanks in advance.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The toolbar command in is the 3rd box on the Math tab, labeled "Subscript" in Mathcad Prime 9; my older version is broken so can't see.

The keyboard command is <CTRL>-

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
Thanks IRstuff.

Are you saying the two options for creating a dead subscript would be clicking the Subscript button at the top of the window (already found that) or hold down ctrl and press - ?

If I wanted to type F[sub]y[/sub], is it no longer possible to type F.y to make that happen?
 
Upvote 0 Downvote
Thanks IRstuff. That really stinks. Hitting the . was extremely fast.

How about the units font? Any way to change that?
 
Upvote 0 Downvote
271828,
Are you using Prime purposefully to torture yourself?

To long-time users of MC, it's like driving a Corolla after years of driving a Cadillac.

Go try using a percent % symbol that works. That was "the straw" for me.
 
Upvote 0 Downvote
Sparweb, I used MC a lot between 2006 and about 2016-17. IIRC, v13 is the last one I used. I've gone another direction since then -- mostly Excel, Octave, and Smath. I'm pretty happy with Excel and Octave for specific applications, but not for Mathcad-like stuff, and I'm not willing to deal with Smath at this point. Thus, I started giving Mathcad another look.

If I understand correctly, MP is the only Mathcad option at this point, correct? The combination of subscription-based, the lack of . for subscript, and the idiotic font for the units are about enough to turn me away. Those are just what I found in the first 15 minutes. LOL. Who knows what other "goodies" are in MP.

I'm also looking at Maple. Their pricing model is different: one-time fee of $2990 for commercial use. That's 4-5 years worth of Mathcad subscription fees, so to me the Maple price is similar or maybe a little better. Any experience with Maple?
 
Upvote 0 Downvote
Maple:
I reviewed it several years ago. I liked it a little bit, but overall wasn't impressed. It seems designed for writing scientific papers, not engineering reports. I think I posted to this forum section about my comparison at the time. Maybe you can find it with a search.

Agreed: Smath is like Mathcad but with the graphing and differential equations chopped off. Um yeah sure you can make those features work, but they are disappointing. And yes, there is also the Russian factor...

PTC made some kind of error when they bought the rights to Mathcad, either not purchasing all of the core components or neglecting them. It was "broken" for a while and they had to come out with Prime where they built their own solver engine from scratch IIRC. Some lucky people bought and kept copies of permanent licensed versions of Mathcad V13 and still use them, like me. We never upgraded so we never were subjected to that nonsense.

If you're open-minded to alternatives:
Calcpad
Blockpad

But really you do have everything you need if you are proficient with Excel and Octave. Do they work together in any way?
 
Upvote 0 Downvote
Thanks for the insight on the MC history. Sounds very unfortunate. I might have a V13 CD. If I find it, I'll reinstall it.

I've used Excel to create hundreds (thousands?) of tools over the years. Octave is great for anything that needs programming. It sounds like that combo might be the best option.

I downloaded Calcpad and played with it some. It looked pretty good. It has the advantage of easy treatment of units, so I should probably give it a better shot.

I saw Blockpad in an internet search, but didn't look further. Sounds like it's worth checking out.
 
Upvote 0 Downvote
PTC made some kind of error when they bought the rights to Mathcad, either not purchasing all of the core components or neglecting them
Click to expand...

They shipped a modified M15 with early versions of MP for doing conversions from Mc to MP, so they bought quite a bit of the original program

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
Upvote 0 Downvote
1500$CAD (about 1200 USD) which is substantially better than Prime!
 
Upvote 0 Downvote
Do you think they have identified a market opportunity for all the disgruntled Mathcad users?

maple1_hwfjct.jpg


maple_2_qsm4wy.jpg
 
Upvote 0 Downvote
I've downloaded the trial version, and installed it without any trouble.
Playing around with it - not making too much progress.
The equation entry method requires more typing than I'm used to, often plus some find and click with the mouse.
Stuck in several places, but it may just be the learning curve, so I won't whine about them yet.
It comes with a manual, and slowly the method is being revealed as I read. RTFM.
 
Upvote 0 Downvote
Since there were comments on Maple Flow in this thread, please let me know your questions. I am happy to share as much information as I can.

Samir Khan
Product Manager, Maple Flow
 
Upvote 0 Downvote
Hi Peter

We have an internal tool that migrates the content of Mathcad 13, 14 and 15 to Flow format ( hints at this). We may release this tool to the public in the future.

Mathcad and Flow are quite different tools with a different language and different feature set, so the automatic conversion isn't 100% (unless you're only doing what's supported by the migration tool). Certain Mathcad specific features aren't supported, like plots, inline programs, range variables. Some of these features may have an alternative manual path for implementation in Flow.

I can let you know more offline - please contact me at Maplesoft (please use the info email at the bottom of and mark it for my attention)

Samir
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

yuriy_biks
  • Locked
  • Question
&quot;This value must be a scalar&quot; issue in the FOR loop Mathcad Prime 9 1
Replies
12
Views
268
3DDave
3DDave
julian89
  • Locked
  • Question
Trilinear interpolation in mathcad prime?
Replies
3
Views
183
bkal
bkal
Ali_003
  • Locked
  • Question
Plotting Fixed Moment Diagram in PTC Mathcad Prime 7
Replies
4
Views
94
Ali_003
Ali_003
WARose
  • Locked
  • Question
Copying from MathCAD to Word
Replies
14
Views
317
dik
dik
edmeister
  • Locked
  • Question
Mathcad Wishlist - Units definition control
Replies
6
Views
218
dik
dik

Part and Inventory Search

Sponsor

Back
Top Bottom