Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need a non-contact painting method 1

Status
Not open for further replies.

NeverNotNixon

Industrial
Dec 21, 2015
5
Designing a mechanism to apply a thin layer of paint to round pieces of steel. Must be NON contact. Right now the best option seems like an airbrush or spray gun with a sheath to prevent over spray. Parts are not masked to keep cycle times down. There must be a better method out there. Suggestions ?

Thank you
 
Replies continue below

Recommended for you

He already rejected that answer, and gave more details about the actual problem, in:
HomeForumsIndustrial / Manufacturing EngineersActivitiesAutomation & Robotic engineering Forum

ISO Non contact paint applicator
thread277-400962

NNN, please ask each question only once, so as not to waste the valuable time that is volunteered. Thank you.



Mike Halloran
Pembroke Pines, FL, USA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor