Note on drawing hidden

[bmarchand]

I created a drawing template and put my usual attribute notes in it for the name I used <W@$SH_PART_NAME> but now I want to move the note to another location but when I open the template its hidden and I can't grab it or see it, it is there and working when I add a drawing

Is there any way to move it now?

Thanks

Brian Marchand-owner
BRM Design
NX 10.0.3.5 / MP6
16G Ram - Nvidia Quadro K4000
Win 7 Pro x64

 

[NutAce]

Can you upload the template?


Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[bmarchand]

Here is the file

Brian Marchand-owner
BRM Design
NX 10.0.3.5 / MP6
16G Ram - Nvidia Quadro K4000
Win 7 Pro x64

 

[NutAce]

Ah sorry....cannot help you there...
We are still at NX9

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[cowski]

Try this:
Add a component that has the required attribute. Now that the note is visible in the template, move it to the desired location. Delete the component and save your template.

www.nxjournaling.com

 

[bmarchand]

LOL, I thought that was going to work cowski, but once the other ones have a value, once I save as to get back to my template name, all the other ones now have a value from the part I opened up, except the name, which worked as planned

Brian Marchand-owner
BRM Design
NX 10.0.3.5 / MP6
16G Ram - Nvidia Quadro K4000
Win 7 Pro x64

 

[cowski]

It is common to have a 'dummy' component in your drawing template to test out the attributes and arrange notes, etc. It is ok to leave the dummy component in the template as long as the dummy component can't be found by your load options. In this case, the dummy component will be replaced by the actual component that you tell the template to reference.

www.nxjournaling.com

 

[bmarchand]

Awesome, thanks!

Brian Marchand-owner
BRM Design
NX 10.0.3.5 / MP6
16G Ram - Nvidia Quadro K4000
Win 7 Pro x64