NX 9.03 - Point in Sketch and negative draft

[ZikiJM]

Hi all,

1. After updating NX9 to last built 9.0.3.4 there is a situation, when I want to make a point in a Sketcher...
I click to "Point" icon and to a display space as normally. After that I have always 2 points in the Sketcher - one click -> two points on the same position.
Do you have somebody the same experience?

2. Is possible to make a negative draft in NX9? ...like in Catia?
I can't make a draft < than 0.
For example...I have a cylinder and I want to make a shape like drop in top view with Draft Body function

Thank you in advance for answers

Jan

 

[phillpd]

As to the two points, don't use the Cursor Location icon, use Inferred Point.

NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)

 

[ZikiJM]

Thanks a lot
I will not ask you why ;-) There is so many "why"...

 

[Toost]

the draft, in what dialog is it that you cannot enter a negative number ?
- have you tried to reverse the vector ?

Regards,
Tomas

 

[ZikiJM]

...I need use the same direction. Attached you will find a picture with the needed shape.