NX CAM post builder

[Proizvodnja]

HI! I have this strange output of my code when it comes about G1

G00 X-3.634 Y8.161 Z.202
G01
G00 X-3.55 Y7.556 Z.707
G01
G00 X-3.499 Y7.188 Z1.406
G01
G00 X-3.493 Y7.143 Z2.192
G01
X-4.487 Y6.941 Z2.198
X-4.499 Y6.982 Z1.412
X-4.601 Y7.337 Z.711

Why does the G1 has the output when there is no motion for him,and why the coordinates for G1 is not in block with it?

 

[nxexplorer]

Hi @Proizvodnja,

Can you share your post?, so I can see and hopefully correct it.
nxexplorer

 

[Proizvodnja]

Thank you my friend for trying to help me.I deleted that post ,and configured new from scratch.Now it's OK.Maybe I will need few tweeks after testing...