Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX11 slows when editing text

Status
Not open for further replies.
Suskam

Suskam

Automotive
Nov 12, 2012
39
In NX 11, when I embed a custom symbol into a note, the editing of the text slows to a crawl. It types 3 or 4 seconds after I type. I removed the embedded symbol and it goes back to normal. The symbol is very simple too. Anyone have something like this happen?

Product Designer: I-Deas/NX/Catia
Automotive Industry
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Are you working Native or Managed (Teamcenter)?

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11
 
Upvote 0 Downvote
We have both, but in this case it is Native.

Product Designer: I-Deas/NX/Catia
Automotive Industry
 
Upvote 0 Downvote
Is the same thing happening when you smash the symbol?

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11
 
Upvote 0 Downvote
You can't smash a symbol that is embedded into a note.

Product Designer: I-Deas/NX/Catia
Automotive Industry
 
Upvote 0 Downvote
I tested in NX 11.0.2.7 MP2 and there I have no issues. Created a simple symbol in the default library.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11
 
Upvote 0 Downvote
I'm still being haunted by this problem. I thought maybe the note was too long (about 50 lines), so I shortened it and still had the same problem. It still seems to be that embedded symbol. As soon as I get rid of it, the typing goes back to normal. I also deleted that embedded symbol, and inserted another one to see if it was specific, but same problem.

Anyone using embedded symbols, please let me know if you have noticed this problem, and a possible solution.

Product Designer: I-Deas/NX/Catia
Automotive Industry
 
Upvote 0 Downvote
Seems you need to make a call at Gtac for this.
Check your graphics card drivers if they are certified by Siemens. Try an update to the latest one.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

multicaduser
  • Locked
  • Question
errors in editing
Replies
6
Views
170
multicaduser
multicaduser
3dr
  • Question
Drafting Files with mixed units failure, NX11
Replies
3
Views
715
Toost
Toost
Gaia_BH1
  • Locked
  • Question
NX 11 - White Text in Model Turns Gray When Background Is Changed to White (light) 1
Replies
2
Views
87
Gaia_BH1
Gaia_BH1
ewh
  • Locked
  • Question
Relationship Values in Text Editor
Replies
1
Views
72
Toost
Toost
Kenja824
  • Locked
  • Question
Remove Text Formatting? 1
Replies
13
Views
131
Equilibriu
Equilibriu

Part and Inventory Search

Sponsor

Back
Top Bottom