nx7.5 Select previous Components

[SDETERS]

In the I-Deas master assembly we had a Move component and under this command one could right click and we had previous entities. For Example if we moved 50 bolts to a new location and we did not like that location. We could move them again and we did not have to select all of the components again. All we did was right click and click previous entities and they would be selected again. Does NX have a similar function?

Thanks

 

[JohnRBaker]

Not really. But I can go into the Assembly Navigator and 'pack' the list so that all the bolts were represented as a single item which when I select it would be like selecting all 50 bolts.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[SDETERS]

Ok cool thanks for the feedback.