Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PAC slurry pumping
- Thread starter dweber
- Start date
waterexpert
Chemical
I've used progressing cavity pumps and screw conveyors in the past. Both worked fine. Materials 321 SS, nitrile rubber for the PC pump, SS for the conveyor.
Seán Moran
Seán Moran
Peristaltic positive displacement pumps should handle the job fine.
Materials as per previous post.
Be careful with your dosing lines as the slurry is very abbrasive. We are installing PVC pipes with SS bends on the project I am currently commissioning.
BigG
Materials as per previous post.
Be careful with your dosing lines as the slurry is very abbrasive. We are installing PVC pipes with SS bends on the project I am currently commissioning.
BigG
- Status
