Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Parameters and logical operators

Status
Not open for further replies.

norkamus

Aerospace
May 15, 2012
76
Is it possible to use IF statements in a parameter formula? What is the syntax like for this if so?
For instance, I'd like a bunch of parameters to update based on one single string parameter.

Nick

Light structural commercial aircraft parts
PCDMIS 4.3 CAD++, CATIA V5 R20
APM Consortium Inc.
Ontario, Canada
 
Replies continue below

Recommended for you

Can totally be done, but within a RULE. You need a Knowledgeware Rule made from the knowledgeware advisor workbench. Stick whatever parameters you want inside the curly brackets.

See Image Example:
u59Kp4B.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor