Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Partition lines dissappear when I unlock the Assembly

Status
Not open for further replies.

bojoka4052

Mechanical
Oct 8, 2021
108
Ive been given an Abaqus CAE model someone else made from 2019, when I start to work at it on my Abaqus 2022 I need to unlock the assembly, but once I unlock it, it needs to regenerate but it fails to do so properly and some partition lines dissappear and I get a warning about constraints etc. Is there a way to avoid this?
 
Replies continue below

Recommended for you

Try manually regenerating (Feature --> Regenerate) both the part and the assembly.

What is the warning message that you get ?
 
Just the message below when I try to regenerate the parts:

1_fg9hov.jpg
 
Is there any additional info printed in the Message Window at the bottom of the Abaqus/CAE window ? You may have to scroll through multiple output lines to find something relevant but there's a great chance that a specific reason for this error is provided in this window.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor