Paste Special with associativity of the copied body

[wmFLIPPER]

Hello,
Q: How do I copy a body and then paste with a link to that body I copied from.

How I would worked in Catia that had this function, I would start out with a simple body rep the stock.
As I progressed to op1 then op2 and so on I would do the copy>paste with link. That way If I needed to change something in op1 it would be seen in op2 on up. I need associativity when pasting.

Is this possible.

I am in 7.5 but will be moving to 10 soon.

 

[NutAce]

When the 2 bodies need to be in two separate parts then Use the Wave Geometry Linker.
If they need to be in the same part then use Extracted Geometry.



Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11

 

[Ehaviv]

According to Ronald explanation
extrated geometry is what you need.

 

[wmFLIPPER]

Thank you Everyone....