Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pickled and Oiled pipe

Status
Not open for further replies.

MarineGreg

Marine/Ocean
Dec 22, 2006
12
Hello all.

What is the process of pickling and oiling steel pipe?
And what are the advantages?

Thanks.
 
Replies continue below

Recommended for you

Pickling is using an acid solution to remove oxide (mill scale, welding & heat treatment scale, rust).
Usually done in either hot sulfuric or slightly heated hydrochloric acid solutions containing inhibitor. Easier than mechanical methods if both inside & outside of pipe must be cleaned.

Oiling is temporary protection from rusting.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor