galen1
Aerospace
- Dec 26, 2003
- 6
Hello
I have been trying to get my plotter (HP 5Si) to work off my network and plot "B" drawings, but this has not happened yet. As you can see and tell I am not a system "IT" person. Here is my question and specs on what I am running.
My problem is I am not a two part problem but I think when one is solved the other one will be also. I need to communate through "TCP/IP" to the "Plotter/Printer" and the "Plot
queue" needs to be set up correctly.
Unigraphics II Version 15 running on "Exceed" running in MS Windows NT 4.0 service pack 5.
Here is the "Plot Queue" I am trying to use
PLRID=LJET5SI
INTEGRITY_ID=0008
DSPNM=UGIIHP
PLTVEN=HEWLETT-PACKARD
TYPE=E
MODEL=7600
SWITCHES=/2/LJ/SP=MW/D=300/AR/
MEDIA=N
OUTMOD=2
COMLN=
QUENAM=\\CADCAM\LJET5SI_QUEUE\
OUTDIR=
MSGLN=TCP/IP\172.16.1.
NPENS=16
DXBET=255
STPSZ=1016
Here is the "SYSLOG" file from system 32 directory.
*** system log created by Administrator
Node Name :- cadcam
Machine type :- Intel x86 Level 6 Revision 0502
OS :- Windows NT 4.0 (Build 1381: Service Pack 5)
error.c was compiled with CHECKING_COMPILE = 1
Session is running in codeset 1252 17
If anyone can help me out I will greatly appreciate it.
Thanks
Galen
I have been trying to get my plotter (HP 5Si) to work off my network and plot "B" drawings, but this has not happened yet. As you can see and tell I am not a system "IT" person. Here is my question and specs on what I am running.
My problem is I am not a two part problem but I think when one is solved the other one will be also. I need to communate through "TCP/IP" to the "Plotter/Printer" and the "Plot
queue" needs to be set up correctly.
Unigraphics II Version 15 running on "Exceed" running in MS Windows NT 4.0 service pack 5.
Here is the "Plot Queue" I am trying to use
PLRID=LJET5SI
INTEGRITY_ID=0008
DSPNM=UGIIHP
PLTVEN=HEWLETT-PACKARD
TYPE=E
MODEL=7600
SWITCHES=/2/LJ/SP=MW/D=300/AR/
MEDIA=N
OUTMOD=2
COMLN=
QUENAM=\\CADCAM\LJET5SI_QUEUE\
OUTDIR=
MSGLN=TCP/IP\172.16.1.
NPENS=16
DXBET=255
STPSZ=1016
Here is the "SYSLOG" file from system 32 directory.
*** system log created by Administrator
Node Name :- cadcam
Machine type :- Intel x86 Level 6 Revision 0502
OS :- Windows NT 4.0 (Build 1381: Service Pack 5)
error.c was compiled with CHECKING_COMPILE = 1
Session is running in codeset 1252 17
If anyone can help me out I will greatly appreciate it.
Thanks
Galen