post DMU50 evolinear command itnc 530 "one" post

[andrenxcam]

staff by chance someone has already developed a post processor for
DMU 50 evolution evolinear or with command iTNC 530 but with only one post
for there is usually use 2 a positioner and a simultaneous.

thanks

andre.

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[andrenxcam]

or has anyone ever seen a post processor iTNC 530 5-axis
not orthogonal "one" post-processor

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[andrenxcam]

anybody here in the forum has machines dmu50 evolution or dmu50 evolinear
with command iTNC 530
working with only one post and nxcam











specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[andrenxcam]

someone is in need of post processors for 5-axis machines

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[jelmerra]

Yes I built and maintain two postprocessors for that particular machine with that controller.

jelmerra

http://www.rouwe-analysis.info

 

[jelmerra]

With two I mean for different software versions of tnc. It is a single postprocessor with is&v. Difference is one uses plane function and the other cycle19 and for multi-axis M128 and tcpm.

 

[andrenxcam]

I just developed a post processor for the command iTNC 530
No links beyond this and have all that I develop all IS & V too ...
I think that Siemens is not developed anything similar for both machines when not orthogonal with the cradle swing

only what devenvolvi and only a post processor for the machine

if there is interest ...

André

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[andrenxcam]

between youtube and type "evolinear"
there you watch my videos of testing without postprocessors links
detail for machines not orthogonal ie DMUs ...

hug!

andre ..

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[andrenxcam]

jelmerra


what type machine you have 3 axis 4 axis and 5 axis
hug!

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[jelmerra]

agie vision 4-axis wedm
bridgeport mk603h 4-axis h-mill
bridgeport vmc 800 3-axis v-mill
bridgeport vmc 1000xp 3-axis v-mill
bridgeport vmc 1500xp3 3-axis v-mill
cb ferrari A17 5-axis v-mill
cms poseidon z1300 5-axis v-mill only is&v demo
deckel maho 800h 5-axis h-mill
demis cmm
demis xml cmm
dixi 510M 5-axis h-mill
dmg dmc 60h 4-axis h-mill
dmg dmc 80h 4-axis h-mill
dmg dmc 105v 5-axis v-mill
dmg dmc 125u 5-axis v-mill only is&v demo
dmg dmu evo50 5-axis v-mill
eew hsm modal 5-axis v-mill only is&v demo
fanuc robodrill 3/4-axis v-mill
fehlmann picomax r95 5-axis v-mill
hermle c30u 5-axis v-mill
heun apos 600 3-axis gun drill
kern pyramid nano 5-axis v-mill
makino a55e 4-axis h-mill
makino d500 5-axis v-mill
makino v55-5xa 5-axis v-mill
makino v20 3-axis v-mill
mazak h400 4-axis h-mill
mazak integrex-e 410hs 5-axis mill/turn
mitsubishi fa20 4-axis wedm
mitsui seiki hu40a 4-axis h-mill
mori seiki nh4000dcg 4-axis h-mill
mori seiki m1 3-axis v-mill
okuma ma600h 4-axis h-mill
okuma ma650vb 4-axis v-mill
roeders rms6 3-axis v-mill
sigma 4-axis v-mill
starragh heckert lx151 5-axis v-mill
yasda ybm640v 3-axis v-mill
zayer kmcu 8000ar 5-axis v-mill

Hi Andre, what kind of machines do you have? I also have a dxf postprocessor to communicate with e.g. mititoyo cmm or grinding machines.

 

[cadcamnx]

many machines are really fantastic

I just got
3 Mikron UCP 600 5-axis
3 dmu50 evolution 5 axis
3 dmu50 evolinear
2 mazak Variax 630
8 3 axis mazak
1 dimensional

If you want to try this post without linking to the evolution dmu 50
and so talk !!!!!

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[cadcamnx]

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world
skype:andrenxcam7