Pekkeri
Mechanical
- Nov 6, 2018
- 11
Hello,
Back in engineering college when we drafted by hand we used the following designation system:
If an assembly designated as XX_01.00 has three parts, then they are designated as XX_01.01 (part #1), XX_01.02 (part #2) and XX_01.03. (part #1). On the ASSY drawing the item numbers match the part designation numbers, so part #1 has an item number 1, part #2 has item nr 2 and so on.
In SolidEdge draft if I create an automatic Parts List then the item numbers are generated randmoly (or at least it seems that way). So is there a way to predefine item numbers already in the assembly file or in the part files?
Back in engineering college when we drafted by hand we used the following designation system:
If an assembly designated as XX_01.00 has three parts, then they are designated as XX_01.01 (part #1), XX_01.02 (part #2) and XX_01.03. (part #1). On the ASSY drawing the item numbers match the part designation numbers, so part #1 has an item number 1, part #2 has item nr 2 and so on.
In SolidEdge draft if I create an automatic Parts List then the item numbers are generated randmoly (or at least it seems that way). So is there a way to predefine item numbers already in the assembly file or in the part files?