Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

problems in WWTP

Status
Not open for further replies.

FilipaPires

Civil/Environmental
Dec 18, 2013
1
0
0
CV
Hello,

I am having low oxigen levels in my aeration tanks and not being able to really understand why it's happening now. Can someone please give me a hint?

Thank you

 
Replies continue below

Recommended for you

Perhaps your aeration diffusers are plugged. Typically, the systems are designed with an excess of aeration capacity.
 
What kind of blowers do you have? Are your air filters clean? Centrifugals can see a large decrease in SCFM with a dirty filter. And washing them or blowing them out with compressed air may not clean them enough to get your rated capacity.

Has your waste stream changed? Is someone dumping something in large quantities that could effect your aeration? Have you checked COD/BOD on influent to see if it is normal?
 
Status
Not open for further replies.
Back
Top