Properties link

[Alan Lowbands]

Hi Gents,
Could anyone tell me how I link the value in a parameter to a part properties box.
I have attached a pic showing what I mean.

thanks
Alan

 

[llbbyy]

I also expect the ansewr

 

[dougsnell]

[ol 1]
[li]Launch Formula Editor[/li]
[li]Select 'User Parameters' from the Filter Drop Down list[/li]
[li]Highlight 'PartNUmber\Properties\PropertyName'[/li]
[li]Click the Add Forumla button[/li]
[li]Select the Parameter from the Spec Tree[/li]
[li]Click OK[/li]
[li]Click OK again[/li]
[/ol]

 

[Alan Lowbands]

Thanks Dougsnell
Much appreciated

Regards
Alan

 

[Alan Lowbands]

just to throw a spanner in the works

This works great but how can I add two parameter values to one properties box.
I need to add the height & width values of some box section to one properties box. eg. 200 X 100

any help would be appreciated

cheers
Alan

 

[LWolf]

just use ToString(Length.1) + " X " + ToString(Length.2) , if you have two length parameters you want to display in one parameter...

regards,
LWolf

 

[Alan Lowbands]

thanks LWolf,
that's a massive help.

best regards
alan