"Face Failed Checks" during Sewing Sheet Bodies

[soheyl81]

When trying to sew two sheet bodies I get this error message. What do you think is the problem, and how can I fix it?

Thanks

 

[JohnRBaker]

Go to...

Analysis -> Examine Geometry...

...and toggle all the options ON and do a 'Select All' and press MB2. You can ignore items like 'Sheet Boundaries', but pay attention 'Self-Intersection' and 'Consistency' in particular.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[soheyl81]

It passes the consistency test, and for self-intersection I get "No Results". Same for other categories.

 

[JohnRBaker]

Sounds like it's time to call GTAC and have them look at the file. They have tools which will dig deeper into the "ones & zeros" to see what might the issue be with your model.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[cowski]

Is this a native NX file, or imported geometry?

http://www.nxjournaling.com

 

[soheyl81]

Imported from IDEAS.