"Miniature" needle roller cage assembly? 1

[Superslinky]

Hi all, I'm looking for a bearing that I can't seem to find and was wondering if I'm missing something. The bearing is a needle roller cage assembly for 1/4" shaft and 1/4" long. It seems all the big bearing manufacturers start the cage assemblies for 3/8" shafts. I was thinking that what I have may be a drawn cup style where the cup was removed however when I bought one like that and removed the cup the bearings fell out of the cage. On the original they seem to be captive in the cage. Is something like this a specialty bearing or should I be searching for some other keywords I'm not aware of?

Thanks for any help.

 

[MintJulep]

http://www.nationalprecision.com/needle-bearings/drawn-cup.php

 

[hydtools]

INA

http://medias.schaeffler.de/medias/en!hp.ec/1_R*0*C02A*14;a4Ck5k2vi1y8

Ted

 

[Superslinky]

Thanks guys but again those are for drawn cup style. I need just the cage assembly.

 

[hydtools]

INA
Try another page

http://medias.schaeffler.de/medias/en!hp.ec.br/K;a4Ck5k2vi1y8?#K

Ted

 

[Superslinky]

Thanks guys. I found what I needed!