Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

recurdyn solver warning 1

Status
Not open for further replies.

manU2208

Mechanical
Joined
May 31, 2018
Messages
2
Location
IN
hi all,


I am trying to perform a motion simulation in NX9.0 (Recurdyn solver). I am wondering how trustworthy the data is going to be, because I keep getting the following warnings for every joint in my simulation except the 'fixed' joint (I have 4 joints):

base_to_balance_link Warning: I marker is not associated with geometry
base_to_balance_link Warning: J marker is not associated with geometry


how to resolve this issue?
 
Sound like you have markers that are not associated to your links.
A marker is an "observation-object" which will be traced in the simulation , :
"I want to know the acceleration in this particular point on this link, why i create a marker there. I can then in the simulation get result data from that specific point"
Since the marker will move in the simulation, it should be associated to the link, follow the link in the calculations.

Edit the marker, snap it to the link it should follow. Or delete the marker for the moment while setting up the simulation.
Add it again when you have a working mechanism.

Regards,
Tomas

 
thanks Mr. Toots,

but i am facing gubler's count issues and there are warning as mentioned above.


regards
 
Toost,
I dub thee Sir Tootsalot.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top