Regarding Wavelink body........

[loka23]

If i wavelink the body in assembly, mass(wegiht) should be zero value. What is procedure to get..........?

 

[JHTH]

Use Edit > Feature > Solid Density, select the wavelinked body and set the density to something like 0.01kg/m³ (it does not allow density = zero).

Hope this helps,

Jon

JHTH
NX 7.0.1.7 + TC 2007

 

[loka23]

If you have applied a material properties, i have keep wavelink body mass zero.
I have tried with above procedure but the component will not select due to applied material Properties. If you want to do this procedure first remove material properties and it works......